Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Interior Panels/Trim
Model Year: 2008 Model: Sequoia Doc ID: RM000003G39000X
Title: INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REASSEMBLY (2008 Sequoia)

REASSEMBLY

1. INSTALL CONSOLE BOX HOLDER HOOK (for Rear Side)



(a) Engage the claw and install the console box holder hook.

2. INSTALL CONSOLE BOX HOLDER HOOK (for Front Side)



(a) Engage the claw and install the console box holder hook.

3. INSTALL POWER OUTLET SOCKET COVER POWER OUTLETS (INT): CENTER POWER OUTLET SOCKET (for Center Console Side): INSTALLATION (2008 Sequoia)+

4. INSTALL POWER POINT SOCKET ASSEMBLY POWER OUTLETS (INT): CENTER POWER OUTLET SOCKET (for Center Console Side): INSTALLATION (2008 Sequoia)+

5. INSTALL CONSOLE BOX BEZEL



(a) Engage the claw and install the console box bezel.

6. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY



(a) Install the interior illumination light with the screw.

7. INSTALL CONSOLE BOX WIRE



(a) Engage the 5 clamps and install the console box wire.

(b) Connect the 2 connectors.

8. INSTALL CONSOLE BOX CUSHION



(a) Install the 2 cushions.

9. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY



(a) Install the console compartment door with the 8 screws.

10. INSTALL CONSOLE COMPARTMENT DOOR CUSHION



(a) Install the 2 cushions.

11. INSTALL CONSOLE REAR END PANEL GARNISH



(a) Install the console rear end panel garnish with the 4 screws.

12. INSTALL CONSOLE BOX BEZEL



(a) Engage the 4 claws and install the console box bezel.

(b) Install the 4 screws.

13. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY

(a) Engage the 2 clamps and install the console rear end panel.

(b) Connect the 4 connectors.

(c) Engage the 6 clips and install the console rear end panel.

14. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY



(a) Engage the 4 clips and install the cup holder.

15. INSTALL CONSOLE BOX REAR COVER



(a) Engage the 2 claws and install the console box rear cover.